Noorwegen
Vrij van rechten*
- Hun lijnen2 Noorse lijnen
87.08.5010 For the vehicles of heading 87.01
Noorse tariefgegevens gecontroleerd 13 september 2026.
Code 8708 50 · Post 8708
Officiële tarieftekst
Delen en toebehoren van motorvoertuigen bedoeld bij de posten 8701 tot en met 8705, drijfassen met differentieel, ook indien met andere organen voor de overbrenging, alsmede draagassen; delen daarvan
Kies de omschrijving die het beste bij je product past.
Invoerrechten op de codes hieronder: 3.5–4.5%*
5 codes hieronder
Probeer een korter woord, of zoek in plaats daarvan in het hele tarief.
Dit is de restcode onder 8708: die dekt wat de andere codes hieronder niet dekken.
Verkopen aan Noorwegen, Groot-Brittannië en de Verenigde Staten
Noorwegen, Groot-Brittannië en de Verenigde Staten hebben eigen tarieflijnen onder de HS-code van zes cijfers. De tarieven hieronder zijn wat hun douane heft op goederen die uit de EU aankomen. Leg de goederen naast de eigen omschrijving van elk land voordat je op een tarief vertrouwt.
Noorwegen
Vrij van rechten*
87.08.5010 For the vehicles of heading 87.01
Noorse tariefgegevens gecontroleerd 13 september 2026.
Groot-Brittannië
Van 0.0% tot 4.0%*
8708 50 20 15 Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive
Voor Noord-Ierland gelden andere regels.
Britse tariefgegevens gecontroleerd 13 september 2026.
Verenigde Staten
15.0%†
Geschat op basis van gepubliceerde Amerikaanse maatregelen
8708.50.11.10 Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles
De Amerikaanse importeur dient de aangifte in.
Amerikaanse tariefgegevens gecontroleerd 16 september 2026.
Noorwegen deelt de 6-cijferige categorie op zijn eigen manier in. Dit zijn dus de Noorse onderverdelingen binnen die categorie, niet deze EU-code. Vergelijk je product met hun omschrijving; per onderverdeling staat wat de Noorse douane heft.
87.08.5010
For the vehicles of heading 87.01
87.08.5090
Other
Bevat gegevens van de Noorse douane (data.toll.no), gelicentieerd onder CC BY 4.0, bewerkt voor weergave.
Wat de Britse douane heft wanneer zulke goederen in Groot-Brittannië aankomen.
8708 50 20 15
Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardened
8708 50 20 18
Propeller shaft for torque transmission from the gearbox to the rear axle, consisting of: -two cardan rods, -central universal joint, -central bearing with suspension in a plastic cover, -universal joints on both ends of the shaft, -slip, tube and end yokes, -of a length of 1,4 m or more but not more than 2,4 m, for use in the production of goods of Chapter 87
8708 50 20 20
Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle - of a length of 1 m or more but not more than 2 m, - of a weight of 6 kg or more but not more than 9 kg
8708 50 20 25
Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with: -6 ball tracks or more but not more than 8, with -a thread, -an external involute spline with 21 or more but not more than 38 teeth, -for running with bearing balls made of steel with a carbon content of 0,48 % or more but not more than 0,57 %, -forged, turned, milled and hardened
8708 50 20 35
Inboard constant velocity joint tripod housing, with: -an outer diameter of 67,0 mm or more but not more than 99,0 mm, -3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm, -an external spline with 21 teeth or more but not more than 41, -forged, turned, rolled and hardened
8708 50 20 50
Double flange bearing of 3rd generation, for motor vehicles, - with double-row ball bearing, - whether or not with impulse (encoder) ring, - whether or not with antilock brake system (ABS) sensor, - whether or not with mounted screws, for use in the manufacture of goods of chapter 87
8708 50 20 55
Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with: -3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm, -forged, turned, broached and hardened
8708 50 20 70
Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with: -an outer diameter of 67,0 mm or more but not more than 84,5 mm, -3 cold calibrated roller tracks with a diameter of 29,90 mm or more but not more than 36,60 mm, - sealing diameter 34,0 mm or more but not more than 41,0 mm, without lead angle, -spline with 21 teeth or more but not more than 35, -bearing seat diameter of 25,0 mm or more but not more than 30,0 mm, with or without oil grooves
8708 50 20 75
Constant velocity joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of: - an inner race with 6 ball tracks or more but not more than 8 for running with the bearing balls with a diameter of 13,0mm or more but not more than 28,0mm, - an outer race with 6 ball tracks or more but not more than 8 for running with the bearing balls, made of steel with carbon content of 0,45% or more but not more than 0,58%, with thread and with a spline with 22 teeth or more but not more than 44, - a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburizing with carbon content of 0,14% or more but not more than 0,55%, and - with a grease compartment, - capable of working at constant speed at variable articulation angle not higher than 52 degrees
8708 50 20 80
Specific pre-assembled or ready-to assemble sections for new mobile cranes
8708 50 20 90
Other
8708 50 35 11
Specific pre-assembled or ready-to assemble sections for new mobile cranes
8708 50 35 90
Other
8708 50 55 11
Specific pre-assembled or ready-to assemble sections for new mobile cranes
8708 50 55 20
Double flange bearing of 3rd generation, for motor vehicles, - with double-row ball bearing, - whether or not with impulse (encoder) ring, - whether or not with antilock brake system (ABS) sensor, - whether or not with mounted screws, for use in the manufacture of goods of chapter 87
8708 50 55 50
Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardened
8708 50 55 91
Specific pre-assembled or ready-to assemble sections for new mobile cranes
8708 50 55 99
Other
8708 50 91 10
Double flange bearing of 3rd generation, for motor vehicles, - with double-row ball bearing, - whether or not with impulse (encoder) ring, - whether or not with antilock brake system (ABS) sensor, - whether or not with mounted screws, for use in the manufacture of goods of chapter 87
8708 50 91 11
Specific pre-assembled or ready-to assemble sections for new mobile cranes
8708 50 91 90
Other
8708 50 99 10
Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle - of a length of 1 m or more but not more than 2 m, - of a weight of 6 kg or more but not more than 9 kg
8708 50 99 25
Housing of tripod type half shaft inboard joint for transmitting a torque from engine and transmission to wheels of motor vehicles with: -an outer diameter of 67,0 mm or more but not more than 84,5 mm, -3 cold calibrated roller tracks with a diameter of 29,90 mm or more but not more than 36,60 mm, - sealing diameter 34,0 mm or more but not more than 41,0 mm, without lead angle, -spline with 21 teeth or more but not more than 35, -bearing seat diameter of 25,0 mm or more but not more than 30,0 mm, with or without oil grooves
8708 50 99 35
Constant velocity joint assembly for transmitting a torque from engine and transmission to wheels of motor vehicles, consisting of: - an inner race with 6 ball tracks or more but not more than 8 for running with the bearing balls with a diameter of 13,0mm or more but not more than 28,0mm, - an outer race with 6 ball tracks or more but not more than 8 for running with the bearing balls, made of steel with carbon content of 0,45% or more but not more than 0,58%, with thread and with a spline with 22 teeth or more but not more than 44, - a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburizing with carbon content of 0,14% or more but not more than 0,55%, and - with a grease compartment, - capable of working at constant speed at variable articulation angle not higher than 52 degrees
8708 50 99 40
Double flange bearing of 3rd generation, for motor vehicles, - with double-row ball bearing, - whether or not with impulse (encoder) ring, - whether or not with antilock brake system (ABS) sensor, - whether or not with mounted screws, for use in the manufacture of goods of chapter 87
8708 50 99 45
Ball-type outboard constant velocity joint housing for transmitting a torque from the engine and transmission to the wheels of motor vehicles, in a form of an outer race, with: -6 ball tracks or more but not more than 8, with -a thread, -an external involute spline with 21 or more but not more than 38 teeth, -for running with bearing balls made of steel with a carbon content of 0,48 % or more but not more than 0,57 %, -forged, turned, milled and hardened
8708 50 99 50
Inboard constant velocity joint tripod housing, with: -an outer diameter of 67,0 mm or more but not more than 99,0 mm, -3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm, -an external spline with 21 teeth or more but not more than 41, -forged, turned, rolled and hardened
8708 50 99 60
Inboard constant velocity joint tripod spider, part of the vehicle's drive system, with: -3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm, -forged, turned, broached and hardened
8708 50 99 70
Specific pre-assembled or ready-to assemble sections for new mobile cranes
8708 50 99 90
Other
Deze tarieven gelden in Groot-Brittannië. Voor goederen die Noord-Ierland binnenkomen, kunnen andere regels gelden.
Bevat overheidsinformatie die is gelicentieerd onder de Open Government Licence v3.0.
Bron: UK Department for Business and Trade (data.api.trade.gov.uk).
Wat de Amerikaanse douane heft wanneer goederen zoals deze uit de EU aankomen. De Amerikaanse importeur dient de aangifte in en betaalt de rechten.
8708.50.11.10
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, For tractors (except road tractors), For tractors suitable for agricultural use, Drive axles with differential, whether or not provided with other transmission components
8708.50.11.50
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, For tractors (except road tractors), For tractors suitable for agricultural use, Non-driving axles
8708.50.31.10
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, For tractors (except road tractors), For other tractors, Drive axles with differential, whether or not provided with other transmission components
8708.50.31.50
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, For tractors (except road tractors), For other tractors, Non-driving axles
8708.50.51.10
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, For vehicles of heading 8703, Drive axles with differential, whether or not provided with other transmission components
8708.50.51.50
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, For vehicles of heading 8703, Non-driving axles
8708.50.61.00
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, For other vehicles, Drive axles with differential, whether or not provided with other transmission components
8708.50.65.00
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles, For other vehicles, Non-driving axles
8708.50.70.00
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Parts, For tractors (except road tractors), For tractors suitable for agricultural use
8708.50.75.00
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Parts, For tractors (except road tractors), For other tractors
8708.50.79.00
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Parts, For vehicles of heading 8703, Parts of non-driving axles
8708.50.81.00
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Parts, For vehicles of heading 8703, Other, Of cast iron
8708.50.85.00
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Parts, For vehicles of heading 8703, Other, Half-shafts
8708.50.89.00
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Parts, For vehicles of heading 8703, Other
8708.50.91.10
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Parts, For other vehicles, Parts of non-driving axles, Spindles
8708.50.91.50
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Parts, For other vehicles, Parts of non-driving axles, Other
8708.50.93.00
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Parts, For other vehicles, Other, Of cast iron
8708.50.95.00
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Parts, For other vehicles, Other, Half-shafts
8708.50.99.00
Parts and accessories of the motor vehicles of headings 8701 to 8705, Drive-axles with differential, whether or not provided with other transmission components, and non-driving axles; parts thereof, Parts, For other vehicles, Other
Antidumpingrechten, compenserende rechten, Amerikaanse invoerbelastingen en douanekosten zijn niet inbegrepen.
De beschrijvingen hierboven zijn de Amerikaanse tariefteksten, die de Verenigde Staten alleen in het Engels publiceert.
Bron: de Harmonized Tariff Schedule van de US International Trade Commission (hts.usitc.gov), publiek domein, en de maatregelen die zijn gepubliceerd in het Federal Register.
Dit is een planningsschatting op basis van de Amerikaanse Harmonized Tariff Schedule (de getoonde revisie) en de maatregelen die op de getoonde datum zijn gepubliceerd in het Federal Register, voor een zending met oorsprong in de EU. Het is geen douaneaangifte, juridisch advies of het oordeel van een expediteur, en douanecodes.nl is geen Amerikaans erkende douane-expediteur. De Amerikaanse importeur of diens expediteur bevestigt de indeling, de oorsprong, de waarde en de verschuldigde rechten voordat er aangifte wordt gedaan.
De hier getoonde tarieven zijn schattingen, gelezen uit officiële tariefgegevens van de EU, Noorwegen en het Verenigd Koninkrijk, alleen ter oriëntatie. Controleer het actuele tarief in het Gebruikstarief van de Nederlandse Douane, in TARIC, bij de Noorse douane of in de Britse Online Trade Tariff voordat je aangifte doet. Het tarief dat je betaalt, kan ook afhangen van het land van oorsprong. Dit zijn alleen de basisinvoerrechten: invoer-btw, accijnzen, antidumpingrechten en vrijwarings- of contingentmaatregelen zitten er niet in.
Maak een gratis account aan om de goederencodes die je nodig hebt op één plek te bewaren en ze terug te vinden wanneer je ze nodig hebt.