Noorwegen
Vrij van rechten*
- Hun lijnen1 Noorse lijn
39.20.6200 Of poly(ethylene terephthalate)
Noorse tariefgegevens gecontroleerd 13 september 2026.
Code 3920 62 · Post 3920
Officiële tarieftekst
Andere platen, vellen, foliën, stroken en strippen, van kunststof zonder celstructuur, niet versterkt, gelaagd of op dergelijke wijze gecombineerd met andere stoffen, niet op een drager, van polycarbonaten, van alkydharsen, van polyallylesters of van andere polyesters, van poly(ethyleentereftalaat)
Kies de omschrijving die het beste bij je product past.
Invoerrechten op de codes hieronder: 6.5%*
3 codes hieronder
Probeer een korter woord, of zoek in plaats daarvan in het hele tarief.
De indeling bepaalt hier het tarief: van 0.0% tot 6.5%.
Verkopen aan Noorwegen, Groot-Brittannië en de Verenigde Staten
Noorwegen, Groot-Brittannië en de Verenigde Staten hebben eigen tarieflijnen onder de HS-code van zes cijfers. De tarieven hieronder zijn wat hun douane heft op goederen die uit de EU aankomen. Leg de goederen naast de eigen omschrijving van elk land voordat je op een tarief vertrouwt.
Noorwegen
Vrij van rechten*
39.20.6200 Of poly(ethylene terephthalate)
Noorse tariefgegevens gecontroleerd 13 september 2026.
Groot-Brittannië
Van 0.0% tot 6.0%*
3920 62 12 00 Poly(ethylene terephthalate) film, of a thickness of 72 micrometres or more
Voor Noord-Ierland gelden andere regels.
Britse tariefgegevens gecontroleerd 13 september 2026.
Verenigde Staten
10.0%†
Geschat op basis van gepubliceerde Amerikaanse maatregelen
3920.62.00.20 Other plates, sheets, film, foil and strip, of plastics, noncellular and not reinforced
De Amerikaanse importeur dient de aangifte in.
Amerikaanse tariefgegevens gecontroleerd 16 september 2026.
Noorwegen deelt de 6-cijferige categorie op zijn eigen manier in. Dit zijn dus de Noorse onderverdelingen binnen die categorie, niet deze EU-code. Vergelijk je product met hun omschrijving; per onderverdeling staat wat de Noorse douane heft.
39.20.6200
Of poly(ethylene terephthalate)
Bevat gegevens van de Noorse douane (data.toll.no), gelicentieerd onder CC BY 4.0, bewerkt voor weergave.
Wat de Britse douane heft wanneer zulke goederen in Groot-Brittannië aankomen.
3920 62 12 00
Poly(ethylene terephthalate) film, of a thickness of 72 micrometres or more but not exceeding 79 micrometres, for the manufacture of flexible magnetic disks; poly(ethylene terephthalate) film, of a thickness of 100 micrometres or more but not exceeding 150 micrometres, for the manufacture of photopolymer printing plates
3920 62 19 05
Poly(ethylene terephthalate) film in rolls: - with a thickness of 0,335 mm or more but not more than 0,365 mm, and - coated with a gold layer with a thickness of 0,03 μm or more but not more than 0,06 μm
3920 62 19 08
Poly(ethylene terephthalate) film, not coated with an adhesive, of a thickness of not more than 25 µm, either: - only dyed in the mass, or - dyed in the mass and metallised on one side
3920 62 19 28
Non-transparent poly(ethylene terephthalate) film: -each outer layer with a thickness of 7 nm or more but not more than 80 nm, -with a tensile strength of 300 N/cm or more (ASTM D-882), -with a total thickness of 200 µm or more but not more than 350 µm, and -with a width of 600 mm or more but not more than 1 600 mm - covered on one side with a layer of a fluoropolymer, and on the other side with an adhesive and a layer of polyvinylidene difluoride, or coated on both sides with polyvinylidene difluoride or polyvinyl fluoride based on fluorinated polymer composites
3920 62 19 32
Transparent poly(ethylene terephthalate) film: -having thickness of both sides of 7 nm or more but not more than 80 nm, or thickness of both sides of 7 µm or more but not more than 80 µm, whether coated with an acrylic-based organic material or not, -with a surface tension of 36 Dyne/cm or more but not more than 39 Dyne/cm, or transparent 3 or 4 layers, second layer of PET, and other layers contain fluorine resin, -with a light transmittance of more than 70 %, -with a haze value of not more than 1,3 %, -with a total thickness of 10 µm or more but not more than 350 µm, -with a width of 800 mm or more but not more than 1 600 mm
3920 62 19 38
Poly(ethylene terephthalate) film, of a thickness of not more than 12 µm, coated on one side with a layer of aluminium oxide of a thickness of not more than 35 nm
3920 62 19 48
Sheets or rolls of poly(ethylene terephthalate): - coated on both sides with a layer of epoxy acrylic resin, - of a total thickness of 37 μm (± 3 μm)
3920 62 19 52
Film of poly(ethylene terephthalate), poly(ethylene naphthalate) or similar polyester, coated on one side with metal and/or metal oxides, containing by weight less than 0,1|% of aluminium, of a thickness of not more than 300|µm and having a surface resistivity of not more than 10|000|ohms (per square) (as determined by the ASTM D 257|method)
3920 62 19 60
Poly (ethylene terephtalate) film: - of a thickness of not more than 20 µm, - coated on at least one side with a gas barrier layer consisting of a polymeric matrix in which silica or aluminium oxide has been dispersed and of a thickness of not more than 2µm
3920 62 19 70
Poly(ethylene terephthalate) film in rolls with: -a thickness of 35 μm or more, but not more than 75 μm, -a tensile strength of 40 MPa or more in the machine direction (MD) and 200 MPa or more in the transverse direction (TD), -an elongation at break of 400 % or more in MD and 30 % or more in TD, -a heat shrinkage (in water at 90 °C/10s) in MD of 0,49 % or more, but not more than 0,51 %, -a dynamic heat shrinkage (between 55 °C and 70 °C ) in TD of not more than 20 percentage points, -a light transmittance of 85 % or more, -a haze ratio of not more than 6 %, -a surface tension of 38 mN/m or more, -a density of 1,30 g/cm³ or more, but not more than 1,34 g/cm³, -a shelf life declared by the manufacturer of not less than 12 months
3920 62 19 79
Reflective film of polyethylene terephthalate, embossed in a pyramidal pattern, with -a thickness of 0.07 mm or more but not more than 0.15 mm -a width of 762 mm or more but not more than 1350 mm
3920 62 19 85
Three-layer transparent plastic film consisting of a 15 µm fluorinated polymer (FCC) (EVA) layer, a 275 µm polyethylene terephthalate (PET) layer and a 25 µm fluorinated polymer (FCC) layer with: -a total thickness of 300 µm or more, but not more than 330 µm, -a tensile strength of 375 N/cm or more in both the longitudinal and transverse directions (ASTM D-882), -a low thermal shrinkage of 1 % or less at 150 °C for 30 minutes, -a low water vapor permeability of 2,5 g/m²•d or less, and -a high breakdown voltage of 18 kV or more and -a partial discharge voltage of 1500 VDC or more (BG/T 123542.2-2009) to be used as a protective layer on the back of photovoltaic modules
3920 62 19 99
Other
3920 62 90 10
Poly(ethylene terephthalate) film in rolls: - with a thickness of 0,335 mm or more but not more than 0,365 mm, and - coated with a gold layer with a thickness of 0,03 μm or more but not more than 0,06 μm
3920 62 90 90
Other
Deze tarieven gelden in Groot-Brittannië. Voor goederen die Noord-Ierland binnenkomen, kunnen andere regels gelden.
Bevat overheidsinformatie die is gelicentieerd onder de Open Government Licence v3.0.
Bron: UK Department for Business and Trade (data.api.trade.gov.uk).
Wat de Amerikaanse douane heft wanneer goederen zoals deze uit de EU aankomen. De Amerikaanse importeur dient de aangifte in en betaalt de rechten.
3920.62.00.20
Other plates, sheets, film, foil and strip, of plastics, noncellular and not reinforced, laminated, supported or similarly combined with other materials, Of polycarbonates, alkyd resins, polyallyl esters or other polyesters, Of poly(ethylene terephthalate), Metallized PET film, Gift wrap
3920.62.00.50
Other plates, sheets, film, foil and strip, of plastics, noncellular and not reinforced, laminated, supported or similarly combined with other materials, Of polycarbonates, alkyd resins, polyallyl esters or other polyesters, Of poly(ethylene terephthalate), Metallized PET film, Other
3920.62.00.90
Other plates, sheets, film, foil and strip, of plastics, noncellular and not reinforced, laminated, supported or similarly combined with other materials, Of polycarbonates, alkyd resins, polyallyl esters or other polyesters, Of poly(ethylene terephthalate), Other
Antidumpingrechten, compenserende rechten, Amerikaanse invoerbelastingen en douanekosten zijn niet inbegrepen.
De beschrijvingen hierboven zijn de Amerikaanse tariefteksten, die de Verenigde Staten alleen in het Engels publiceert.
Bron: de Harmonized Tariff Schedule van de US International Trade Commission (hts.usitc.gov), publiek domein, en de maatregelen die zijn gepubliceerd in het Federal Register.
Dit is een planningsschatting op basis van de Amerikaanse Harmonized Tariff Schedule (de getoonde revisie) en de maatregelen die op de getoonde datum zijn gepubliceerd in het Federal Register, voor een zending met oorsprong in de EU. Het is geen douaneaangifte, juridisch advies of het oordeel van een expediteur, en douanecodes.nl is geen Amerikaans erkende douane-expediteur. De Amerikaanse importeur of diens expediteur bevestigt de indeling, de oorsprong, de waarde en de verschuldigde rechten voordat er aangifte wordt gedaan.
De hier getoonde tarieven zijn schattingen, gelezen uit officiële tariefgegevens van de EU, Noorwegen en het Verenigd Koninkrijk, alleen ter oriëntatie. Controleer het actuele tarief in het Gebruikstarief van de Nederlandse Douane, in TARIC, bij de Noorse douane of in de Britse Online Trade Tariff voordat je aangifte doet. Het tarief dat je betaalt, kan ook afhangen van het land van oorsprong. Dit zijn alleen de basisinvoerrechten: invoer-btw, accijnzen, antidumpingrechten en vrijwarings- of contingentmaatregelen zitten er niet in.
Maak een gratis account aan om de goederencodes die je nodig hebt op één plek te bewaren en ze terug te vinden wanneer je ze nodig hebt.